Layer 3 Routing Commands 1506
IcmpInRedirects................................ 0
IcmpInEchos.................................... 3
IcmpInEchoReps................................. 0
IcmpInTimestamps............................... 0
IcmpInTimestampReps............................ 0
IcmpInAddrMasks................................ 0
IcmpInAddrMaskReps............................. 0
IcmpOutMsgs.................................... 3
IcmpOutErrors.................................. 0
IcmpOutDestUnreachs............................ 0
IcmpOutTimeExcds............................... 0
IcmpOutParmProbs............................... 0
IcmpOutSrcQuenchs.............................. 0
IcmpOutRedirects............................... 0
IcmpOutEchos................................... 3
IcmpOutEchoReps................................ 3
IcmpOutTimestamps.............................. 0
IcmpOutTimestampReps........................... 0
IcmpOutAddrMasks............................... 0
show ip vlan
Use the show ip vlan command to display the VLAN routing information for
all VLANs with routing enabled.
Syntax
show ip vlan
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays VLAN routing information.
console#show ip vlan
MAC Address used by Routing VLANs: 00:00:00:01:00:02
To Next Page
Loading...
