Dell N1100-ON

Audio Visual Bridging Commands 1093
Example
This example administratively enables MSRP talker propagation from outside
the domain.
console(config)#no msrp global
console(config)#msrp boundary-propagate
console(config)#msrp global
console(config)#show msrp summary
MSRP Global Admin Mode......................... Enabled
MSRP Talker Pruning............................ Disabled
MSRP Maximum Fan-in Ports...................... 12
MSRP Boundary Propagation...................... Enabled
QAV class A priority........................... 4
QAV class A remap priority..................... 1
QAV class B priority........................... 3
QAV class B remap priority..................... 1
msrp delta-bw
Use this command to configure the MSRP VLAN ID for the SR traffic class
on the interface.
Syntax
msrp delta-bw [a | b ] bandwidth
no msrp delta-bw [a | b ]
bandwidth—The maximum percentage of bandwidth which may be reserved
for a traffic class on an interface. The range is 0–75.
Default Configuration
By default, up to 75% of the interface bandwidth may be reserved for class A
traffic and 0% may be reserved for class B traffic.
Command Mode
Interface Configuration mode (physical and port channel), Interface range
mode (physical and port channel)
User Guidelines
MSRP must also be enabled globally in order to become operational.