Layer 3 Routing Commands 1380
User Guidelines
The capabilities in the switch firmware are determined during the build
process.
Command History
Introduced in version 6.3.0.1 firmware.
Examples
This example displays the capabilities of an N3000_N2000v6.3.x.x firmware
build.
console# show router-capability
Switch is capable of operating as an ACCESS ROUTER utilizing OSPF and RIP.
MP-BGP capability is unavailable.
This example displays the capabilities of an N3000BGPv6.3.x.x firmware
build.
console#show router-capability
Switch is capable of operating as an AGGREGATION ROUTER utilizing MP-BGP,
OSPF and RIP.
iSCSI, MLAG, DVLAN, MVR, GARP, Auto-VoIP, and Web capabilities are
unavailable.
template peer
Use the template peer command in router configuration mode to create a
BGP peer template and enter peer template configuration mode. To delete a
peer template, use the no form of this command.
Syntax
template peer name
no template peer name
• name—The name of the template. The name may be no more than 32
characters.
To Next Page
Loading...
