Dell N1100-ON

Security Commands 857
Examples
console#configure
console(config)#aaa ias-user username client-1
console(config-ias-user)#exit
console(config)#no aaa ias-user username client-1
aaa new-model
The aaa new-model command in Global Configuration mode is a no-op
command. It is present only for compatibility purposes. Dell EMC
Networking switches only support the new model command set.
Syntax
aaa new-model
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the switch to use the new model command
set.
(config)# aaa new-model
aaa server radius dynamic-author
Use this command to enter dynamic RADIUS server configuration mode.
Syntax
aaa server radius dynamic-author