Dell N1100-ON

Layer 2 Switching Commands 565
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
Default Value
Not applicable
Example
console#show lldp med interface all
LLDP MED Interface Configuration
Interface Link configMED operMED ConfigNotify TLVsTx
--------- ------ --------- -------- ------------ -----------
Gi1/0/1 Detach Enabled Enabled Enabled0,1
Gi1/0/2 Detach Disabled Disabled Disabled 0,1
Gi1/0/3 Detach Disabled Disabled Disabled 0,1
Gi1/0/4 Detach Disabled Disabled Disabled 0,1
Gi1/0/5 Detach Disabled Disabled Disabled 0,1
console #show lldp med interface gi1/0/1
LLDP MED Interface Configuration
Interface Link configMED operMED ConfigNotify TLVsTx
--------- ------ -------- -------- -------- -------
Gi1/0/1 Up Enabled Enabled Disabled 0,1
TLV Codes: 0- Capabilities, 1- Network Policy
2-Location, 3- Extended PSE, 4- Extended PD, 5-Inventory
show lldp med local-device detail
This command displays the advertised LLDP local data in detail.
Syntax
show lldp med local-device detail {gigabitethernet unit/slot/port |
tengigabitethernet unit/slot/port}
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes