Dell N1100-ON

Data Center Technology Commands 1144
User Guidelines
NOTE: This command is only available on N40xx series switches.
This command has no user guidelines.
Examples
console# show lldp tlv-select interface te1/0/1
Interface ETS Config ETS Recommend PFC App Priority QCN
------------ ---------- ------------- --- ------------ ---
te1/0/1 Yes No Yes No Yes
console# show lldp tlv-select interface all
Interface ETS Config ETS Recommend PFC App Priority QCN
----------- ---------- ------------- --- ------------ ---
te1/0/1 Yes No Yes No Yes
te1/0/2 No No Yes No Yes
show lldp dcbx
Use the show lldp dcbx command to display the Traffic Class to Traffic Class
Group mapping.
Syntax
show lldp dcbx [interface [all|interface-id detail|status]]
• interface-id —A valid physical interface specifier.
• all—All interfaces.
• detail—Display detailed DCBX information.
• status—Display a status summary.
Default Configuration
This command has no default setting.
Command Mode
Privileged Exec
User Guidelines
NOTE: This command is only available on N40xx series switches.