Data Center Technology Commands 1145
This command has no user guidelines.
Example #1
DCBX Status:
console# show lldp dcbx interface all status
Config DCBX DCBX Frame TLV
Interface Status Role Version Rx Tx Errors Dscrd Dscrd
---------- ------- -------- -------- ------ ------ ------ ------ -----
te1/0/1 Enabled Auto-up CEE 1.06 Yes 32 37 0 0
te1/0/2 Enabled Auto-up IEEE 32 37 0 0
te2/0/1 Enabled Auto-dn CIN 1.0 32 37 0 0
te2/0/2 Enabled Auto-dn IEEE 32 37 0 0
te3/0/1 Enabled Auto-dn CIN 1.0 32 37 0 0
te3/0/2 Disabled Manual IEEE 0 0 0 0
Example #2
DCBX not enabled:
console# show lldp dcbx interface te1/0/1
Interface te1/0/1
DCBX Admin Status: Disabled
Configured DCBX Version: Auto-detect
Peer DCBX Version:
Peer MAC:
Peer Description:
Auto-configuration Port Role: Manual
Peer Is Configuration Source: False
Error Counters:
ETS Incompatible Configuration: 0
PFC Incompatible Configuration: 0
Disappearing Neighbor: 0
Multiple Neighbors Detected: 0
Example #3
DCBX enabled – legacy device (CIN/CEE):
console# show lldp dcbx interface te1/0/1
Interface te1/0/1
DCBX Admin Status: Enabled
Configured Version: Auto-detect
Peer DCBX Version: CIN Version 1.0
Peer MAC: 00:23:24:A4:21:03
Peer Description: Cisco Nexus 5020 IOS Version 5.00
To Next Page
Loading...
