Dell N1100-ON

Dell EMC Networking CLI 106
DHCP L2 Relay
isdp holdtime Configures the hold time for ISDP packets that
the switch transmits.
GC
isdp timer Sets period of time between sending new ISDP
packets.
GC
show isdp Displays global ISDP settings. PE
show isdp entry Displays ISDP entries. PE
show isdp interface Displays ISDP settings for the specified
interface.
PE
show isdp neighbors Displays the list of neighboring devices. PE
show isdp traffic Displays ISDP statistics. PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
dhcp l2relay (Global
Configuration)
Enables the Layer 2 DHCP Relay agent for an
interface or globally.
GC or
IC
dhcp l2relay (Interface
Configuration)
Enables DHCP L2 Relay for an interface. IC
dhcp l2relay circuit-id Enables user to set the DHCP Option 82
Circuit ID for a VLAN.
GC
dhcp l2relay remote-id Enables user to set the DHCP Option 82
Remote ID for a VLAN.
GC
dhcp l2relay trust Configures an interface to trust a received
DHCP Option 82.
IC
dhcp l2relay vlan Enables the L2 DHCP Relay agent for a set of
VLANs.
GC
show dhcp l2relay all Displays the summary of DHCP L2 Relay
configuration.
PE or
GC
show dhcp l2relay interface Displays DHCP L2 Relay configuration specific
to interfaces.
PE
Command Description Mode
a