Layer 2 Switching Commands 370
Syntax
show ipv6 verify source
Default Configuration
There is no default configuration for this command.
Command Modes
User Exec, Privileged Exec (all show modes)
User Guidelines
If MAC address filtering is not configured on the interface, the MAC Address
field is empty. If port security is disabled on the interface, the MAC Address
field displays permit-all.
The filter type is one of the following:
• ipv6-mac: User has configured MAC address filtering on this interface.
• ipv6: Only IPv6 address filtering is configured on this interface.
Example
show ipv6 verify source
Interface Filter Type IPv6 Address MAC Address Vlan
--------- ----------- --------------- ----------------- -----
Gi1/0/1 ipv6-mac 2000::1/64 00:02:B3:06:60:80 10
Gi1/0/1 ipv6-mac 3000::1/64 00:0F:FE:00:13:04 10
To Next Page
Loading...
