Dell EMC Networking CLI 128
police-two-rate
Implements a two-rate Three Color Marker
(trTCM) per RFC 2698.
PCMC
policy-map
Establishes a new DiffServ policy or enters
policy map configuration mode.
GC
random-detect queue-
parms
Configures the green, yellow and red TCP and
non-TCP packet minimum and maximum
thresholds and corresponding drop
probabilities on an interface or all interfaces.
GC, IC,
or IR
random-detect exponential-
weighting-constant
Configures the decay in the calculation of the
average queue size user for WRED on an
interface or all interfaces.
GC, IC,
or IR
redirect
Specifies that all incoming packets for the
associated traffic stream are redirected to a
specific egress interface (Ethernet port or port-
channel).
PCMC
service-policy
Attaches a policy to an interface in a particular
direction.
GC or
IC
show class-map
Displays all configuration information for the
specified class.
PE
show classofservice dot1p-
mapping
Displays the current 802.1p priority mapping
to internal traffic classes for a specific interface.
PE
show classofservice ip-dscp-
mapping
Displays the current IP DSCP mapping to
internal traffic classes for a specific interface.
PE
show classofservice trust
Displays the current trust mode setting for a
specific interface.
PE
show diffserv
Displays the DiffServ General Status
information.
PE
show diffserv service
interface
Displays policy service information for the
specified interface and direction.
PE
show diffserv service brief
Displays all interfaces in the system to which a
DiffServ policy has been attached.
PE
show interfaces cos-queue
Displays the class-of-service queue
configuration for the specified interface.
PE
Command Description Mode
a
To Next Page
Loading...
