Dell N1100-ON

Dell EMC Networking CLI 130
spanning-tree backbonefast Enables the detection of indirect link failures
and accelerate spanning tree convergence on
STP-PV/RSTP-PV configured switches using
Indirect Link Rapid Convergence (IRC).
GC
spanning-tree bpdu flooding Allows flooding of BPDUs received on
nonspanning-tree ports to all other non-
spanning-tree ports.
GC
spanning-tree bpdu-
protection
Enables BPDU protection on a switch. GC
spanning-tree cost Configures the spanning tree path cost for a
port.
IC
spanning-tree disable Disables spanning tree on a specific port. IC
spanning-tree forward-time Configures the spanning tree bridge forward
time.
GC
spanning-tree guard Selects whether loop guard or root guard is
enabled on an interface.
IC
spanning-tree loopguard Enables loop guard on all ports. GC
spanning-tree max-age Configures the spanning tree bridge maximum
age.
GC
spanning-tree max-hops Sets the MSTP Max Hops parameter to a new
value for the common and internal spanning
tree.
GC
spanning-tree mode Configures the spanning tree protocol. GC
spanning-tree mst
configuration
Enables configuring an MST region by entering
the multiple spanning-tree (MST) mode.
GC
spanning-tree mst cost Configures the path cost for multiple spanning
tree (MST) calculations.
IC
spanning-tree mst port-
priority
Configures port priority. IC
spanning-tree mst priority Configures the switch priority for the specified
spanning tree instance.
GC
spanning-tree portfast Enables portfast mode. IC
Command Description Mode
a