Layer 3 Routing Commands 1344
• Prefix-list list-name —(Optional) The name of a prefix list indicating the
list of matching routes to display.
Default Configuration
There is no default configuration.
Command Mode
User Exec mode, Privileged Exec mode, Global Configuration mode and all
sub-modes.
User Guidelines
The following fields are displayed.
Command History
Introduced in version 6.2.0.1 firmware.
Field Description
BGP table version Each time phase 2 of the BGP decision process runs to
select new BGP routes, this number is incremented.
Status codes
• s—The route is aggregated into an aggregate address
configured with the summary-only option
• *—Dell EMC Networking BGP never displays invalid
routes; so this code is always displayed (to maintain
consistency with the industry standard)
• >—Indicates that BGP has selected this path as the
best path to the destination
•
i—If the route is learned from an internal peer
Network Destination prefix
Next Hop The route’s BGP next hop
Metric Multi-Exit Discriminator
LocPrf The local preference
Path The AS path
Origin The value of the Origin attribute
To Next Page
Loading...
