Dell N1100-ON

Dell EMC Networking CLI 157
BGP
ipv6 ospf bfd Enables sending of BFD events to OSPF on a
VLAN routing interface.
IC
neighbor fall-over bfd Enables BFD support for a BGP neighbor. RBC
show bfd neighbor Displays the neighbors for which BFD has
established adjacencies.
PE or
GC
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
router bgp Enables BGP and identify the autonomous
system (AS) number for the router.
GC
address-family Configures policy parameters within a peer
template to be applied to a specific address
family
PTC
address-family ipv4 vrf
address-family ipv6
Specifies IPv6 configuration parameters. BR
aggregate-address Configures a summary address for BGP. BR or
IPAF
bgp aggregate-different-
meds (BGP Router
Configuration)
Controls the aggregation of routes with
different multi-exit discriminator (MED)
attributes.
BR
bgp aggregate-different-
meds (IPv6 Address Family
Configuration)
Allows IPv6 routes with different MEDs to be
aggregated.
IPAF
bgp always-compare-med Compares MED values during the decision
process in paths received from different
autonomous systems.
BR
IPAF
bgp client-to-client
reflection (BGP Router
Configuration)
Enables client-to-client reflection. BR
bgp client-to-client
reflection (IPv6 Address
Family Configuration)
Enables client-to-client reflection. IPAF
Command Description Mode
a