Dell N1100-ON

Dell EMC Networking CLI 161
neighbor inherit peer Configures a BGP peer to inherit peer
configuration parameters from a peer template.
BR
neighbor local-as Configures BGP to advertise the local-as instead
of the router’s own AS in the routes advertised
to the neighbor.
BR,
IPAF
neighbor maximum-prefix
(BGP Router
Configuration)
Configures the maximum number of IPv4
prefixes that BGP will accept from a specified
neighbor.
BR
neighbor maximum-prefix
(IPv6 Address Family
Configuration)
Specifies the maximum number of IPv6 prefixes
that BGP will accept from a given neighbor.
IPAF
neighbor next-hop-self
(BGP Router
Configuration)
Configures BGP to set the next hop attribute to
a local IP address when advertising a route to an
internal peer.
BR
neighbor next-hop-self (IPv6
Address Family
Configuration)
Configures BGP to use a local address as the
IPv6 next hop when advertising IPv6 routes to a
specific peer.
IPAF
neighbor password Enables MD5 authentication of TCP segments
sent to and received from a neighbor, and to
configure an authentication key.
BR
neighbor prefix-list (BGP
Router Configuration)
Filters advertisements sent to a specific
neighbor based on the destination prefix of each
route.
BR
neighbor prefix-list (IPv6
Address Family
Configuration)
Specifies an IPv6 prefix list to filter routes
received from or advertised to a given peer.
IPAF
neighbor remote-as Configures a neighbor and identify the
neighbor’s autonomous system.
BR
neighbor remove-private-as Removes private AS numbers when advertising
IPv4 routes to an external peer.
BR
neighbor rfc5549-support Enables advertisement of IPv4 routes over IPv6
next hops selectively to an external BGP IPv6
peer.
BR
neighbor route-map (BGP
Router Configuration)
Applies a route map to incoming or outgoing
routes for a specific neighbor.
BR
Command Description Mode
a