Dell N1100-ON

Dell EMC Networking CLI 166
DHCP Server and Relay Agent (IPv4)
match ipv6 address prefix-
list
Configures a route map to match based on an
IPv6 destination prefix.
RM
show ip as-path-access-list Displays the contents of AS path access lists. PE or
GC
show ip community-list Displays the contents of AS path access lists. PE or
GC
show ip prefix-list Displays the contents of IPv4 prefix lists. PE or
GC
show ipv6 prefix-list Displays the contents of IPv6 prefix lists. PE or
GC
clear ip prefix-list Resets the IPv4 prefix-list counters. PE
clear ipv6 prefix-list Resets the IPv6 prefix-list counters. PE
clear ip community-list Resets the IPv6 prefix-list counters. PE
set as-path Prepends one or more AS numbers to the AS
path in a BGP route.
RC
set comm-list delete Removes BGP communities from an inbound
or outbound UPDATE message.
RM
set community Modifies the communities attribute of
matching routes.
RM
set ipv6 next-hop (BGP) Sets the IPv6 next hop of a route. RM
set local-preference Sets the local preference of specific BGP routes. RM
set metric Sets the metric of a route. RM
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
ip dhcp pool Defines a DHCP address pool that can be used
to supply addressing information to DHCP
client. This command puts the user into DHCP
Pool Configuration mode.
GC
Command Description Mode
a