Dell N1100-ON

Layer 3 Routing Commands 1692
Example
The following example displays the number of each type of LSA in the
database for each area and for the router.
console#show ip ospf database database-summary
OSPF Router with ID (5.5.5.5)
Area 0.0.0.0 database summary
Router......................................... 0
Network........................................ 0
Summary Net.................................... 0
Summary ASBR................................... 0
Type-7 Ext..................................... 0
Self Originated Type-7......................... 0
Opaque Link.................................... 0
Opaque Area.................................... 0
Subtotal....................................... 0
Area 0.0.0.10 database summary
Router......................................... 0
Network........................................ 0
Summary Net.................................... 0
Summary ASBR................................... 0
Type-7 Ext..................................... 0
Self Originated Type-7......................... 0
Opaque Link.................................... 0
Opaque Area.................................... 0
Subtotal....................................... 0
Router database summary
Network Shows Total number of network LSAs in the OSPF link state
database.
Summary Net Shows Total number of summary network LSAs in the database.
Summary
ASBR
Shows Number of summary ASBR LSAs in the database.
Type-7 Ext Shows Total number of Type-7 external LSAs in the database.
Self-
Originated
Type-7
Shows Total number of self originated AS external LSAs in the
OSPFv3 link state database.
Opaque Link Shows Number of opaque link LSAs in the database.
Opaque Area Shows Number of opaque area LSAs in the database.
Subtotal Shows Number of entries for the identified area.
Opaque AS Shows Number of opaque AS LSAs in the database.
Total Shows Number of entries for all areas.