Dell N1100-ON

Dell EMC Networking CLI 189
area nssa default-info-
originate (Router
OSPFv3 Config)
Configures the metric value and type for the
default route advertised into the NSSA.
ROSV3
area nssa no-redistribute Configures the NSSA ABR so that learned
external routes will not be redistributed to the
NSSA.
ROSV3
area nssa no-summary Configures the NSSA so that summary LSAs are
not advertised into the NSSA.
ROSV3
area nssa translator-role Configures the translator role of the NSSA. ROSV3
area nssa translator-stab-
intv
Configures the translator stability interval of the
NSSA.
ROSV3
area range (Router
OSPFv3)
Creates an area range for a specified NSSA. ROSV3
area stub Creates a stub area for the specified area ID. ROSV3
area stub no-summary Disables the import of Summary LSAs for the
stub area identified by areaid.
ROSV3
area virtual-link Creates the OSPF virtual interface for the
specified areaid and neighbor.
ROSV3
area virtual-link dead-
interval
Configures the dead interval for the OSPF virtual
interface on the virtual interface identified by
areaid and neighbor.
ROSV3
area virtual-link hello-
interval
Configures the hello interval for the OSPF virtual
interface on the virtual interface identified by
areaid and neighbor.
ROSV3
area virtual-link
retransmit-interval
Configures the retransmit interval for the OSPF
virtual interface on the virtual interface identified
by areaid and neighbor.
ROSV3
area virtual-link transmit-
delay
Configures the transmit delay for the OSPF
virtual interface on the virtual interface identified
by areaid and neighbor.
ROSV3
default-information
originate (Router
OSPFv3 Configuration)
Controls the advertisement of default routes. ROSV3
default-metric Sets a default for the metric of distributed routes. ROSV3
Command Description Mode
a