Dell N1100-ON

Dell EMC Networking CLI 192
Router Discovery Protocol
show ipv6 ospf interface
vlan
Displays OSPFv3 configuration and status
information for a specific VLAN.
PE
show ipv6 ospf neighbor Displays information about OSPF neighbors. PE
show ipv6 ospf range Displays information about the area ranges for
the specified area identifier.
PE
show ipv6 ospf stub table Displays the OSPF stub table. PE
show ipv6 ospf virtual-
links
Displays the OSPF Virtual Interface information
for a specific area and neighbor.
PE
show ipv6 ospf virtual-
link brief
Displays the OSPFV3 Virtual Interface
information for all areas in the system.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
encapsulation Enables Router Discovery on an interface. IC
ip irdp holdtime Configures the value, in seconds, of the hold-
time field of the router advertisement sent from
this interface.
IC
ip irdp maxadvertinterval Configures the maximum time, in seconds,
allowed between sending router advertisements
from the interface.
IC
ip irdp minadvertinterval Configures the minimum time, in seconds,
allowed between sending router advertisements
from the interface.
IC
ip irdp multicast Sends router advertisements as IP multicast
packets.
IC
ip irdp preference Configures the preference of the address as a
default router address relative to other router
addresses on the same subnet.
IC
show ip irdp Displays the router discovery information for all
interfaces, or for a specified interface.
PE
Command Description Mode
a