Switch Management Commands 1957
• name — Default domain name used to complete an unqualified host
name. Do not include the initial period that separates the unqualified host
name from the domain name (Range: 1-255 characters).
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines a default domain name of dell.com.
console(config)#ip domain-name dell.com
ip host
Use the ip host command in Global Configuration mode to define static host
name-to-address mapping in the host cache. To delete the name-to-address
mapping, use the no form of this command.
Syntax
ip host name address
no ip host name
• name — Host name.
• address — IP address of the host.
Default Configuration
No host is defined.
Command Mode
Global Configuration mode
To Next Page
Loading...
