Dell N1100-ON

Dell EMC Networking CLI 204
debug console Enables the display of debug trace output on
the login session in which it is executed.
PE
debug crashlog Displays the crash log contents on the console. PE or
GC
debug dhcp packet Displays debug information about DHCPv4
client activities and traces DHCP v4 packets to
and from the local DHCPv4 client.
PE
debug dot1ag Enable the tracing of CFM components for
events and CFM PDUs based on the type of
packet for reception and transmission.
PE
debug dot1x Enables dot1x packet tracing. PE
debug igmpsnooping Enables tracing of IGMP Snooping packets
transmitted and/or received by the switch.
PE
debug ip acl Enables debug of IP Protocol packets matching
the ACL criteria.
PE
debug ip bgp Enables debug tracing of BGP events. PE
debug ip dvmrp Traces DVMRP packet reception and
transmission.
PE
debug ip igmp Traces IGMP packet reception and
transmission.
PE
debug ip mcache Traces MDATA packet reception and
transmission.
PE
debug ip pimdm packet Traces PIMDM packet reception and
transmission.
PE
debug ip pimsm packet Traces PIMSM packet reception and
transmission.
PE
debug ipv6 dhcp Displays debug information about DHCPv6
client activities and to trace DHCPv6 packets to
and from the local DHCPv6 client.
PE
debug ipv6 mcache Traces MDATAv6 packet reception and
transmission.
PE
debug ipv6 mld Traces MLD packet reception and transmission. PE
Command Description Mode
a