Dell N1100-ON

Dell EMC Networking CLI 206
sFlow
ip http timeout-policy Configures the timeout policy for closing HTTP
and HTTPS sessions to the local HTTP server.
GC
show debugging Displays packet tracing configurations. PE
show supported mibs Displays the HTTP server status and
configuration.
PE,
GC
show supported mibs Displays the implemented SNMP MIBs. PE,
GC
snapshot bgp Dumps a set of BGP debug information to
capture the current state of BGP.
S
write core Generates a core file on demand and either,
reboots the switch or tests the core file
configuration.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
sflow destination Configures sFlow collector parameters (owner
string, receiver timeout, ip address, and port).
GC
sflow polling Enables a new sflow poller instance for the data
source if rcvr_idx is valid.
GC
sflow polling (Interface
Mode)
Enable a new sflow poller instance for this data
source if rcvr_idx is valid.
IC
sflow sampling Enables a new sflow sampler instance for this
data source if rcvr_idx is valid.
GC
sflow sampling (Interface
Mode)
Enables a new sflow sampler instance for this
data source if rcvr_idx is valid.
IC
sflow source-interface Selects the interface from which to use the IP
address inserted in the source IP address field of
transmitted sFlow packets.
GC
show sflow agent Displays the sflow agent information. PE
show sflow destination Displays all the configuration information
related to the sFlow receivers.
PE
Command Description Mode
a