Dell N1100-ON

Switch Management Commands 2220
Per Unit Status Parameters are explained as follows:
Examples
Example – Stack Status for the Switch
console#show switch 1
Switch............................ 1
Management Status................. Management Switch
Switch Type....................... 0xd8460001
Preconfigured Model Identifier.... N4064
Plugged-in Model Identifier....... N4064
Switch Status..................... OK
Management Status This field indicates whether the switch is the
Management Switch, a stack member, or the
status is unassigned.
Standby Status This field indicates whether the switch is the
Standby Switch.
Preconfigured Model Identifier This field displays the model identifier of a
preconfigured switch ready to join the stack.
The Model Identifier is a 32-character field
assigned by Dell to identify the switch.
Plugged-In Model Identifier This field displays the model identifier of the
switch physically present in the stack. The
Model Identifier is a 32-character field assigned
by Dell to identify the switch.
Switch Status This field indicates the switch status. Possible
values for this state are: OK, Unsupported,
Code Mismatch, Cfg Mismatch, SDM
Mismatch, STM Mismatch, or NotPresent
Code Version This field indicates the detected version of code
on this switch.
Parameter Description Range Default
NSF Support Whether a unit
supports NSF
Yes or No Yes
Unit Description