Dell N1100-ON

Switch Management Commands 2230
A USB device must be plugged in to the USB port, and cleanly mounted, if
the usb parameter is given.
Default Value
This command has no defaults.
Example
console#show tech-support
***************** Show Version ******************
Switch: 1
System Description................ Dell Networking N4032, 6.0.0.0, Linux
2.6.32.9
Machine Description............... Dell Networking Switch
System Model ID................... N4032
Machine Type...................... Dell Networking N4032
Serial Number..................... 0000
Manufacturer...................... 0xbc00
Operating System.................. Linux 2.6.32.9
Burned In MAC Address............. 0011.2233.4455
System Object ID.................. 1.3.6.1.4.1.674.10895.3042
CPU Version....................... XLP308H-B2
SOC Version....................... BCM56842_A1
HW Version........................ 3
CPLD Version...................... 17
unit active backup current-active next-active
---- ----------- ----------- -------------- --------------
1 6.0.0.0 <none> 6.0.0.0 6.0.0.0
Operating System............................... Linux 2.6.32
Additional Packages............................ FTOS QoS
FTOS Multicast
FTOS Stacking
FTOS Routing
FTOS Data Center
***************** Show SysInfo ******************
System Location................................