Switch Management Commands 2245
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
It is not required to update the boot code unless directed to do so in the
release notes. Dell EMC Networking switches utilize a universal boot loader
and do not contain version specific dependencies in the boot loader. If unit is
not specified, all units in the stack are updated. This command does not
reboot the stack members after the update completes. Do not reload or power
off stack members during the update process as it may cause a switch to fail
on a subsequent boot.
Example
The following example updates the bootcode on unit 2.
console#update bootcode 2
To Next Page
Loading...
