Dell N1100-ON

Using the CLI 228
1 default Po1-128, Default
Gi1/0/1-24,
Te1/0/1-2
RSPAN Vlan
---------------------------------------------------------------------
None
console(config-if-Gi1/0/23)#show slot 2/0
Slot.............................. 2/0
Slot Status....................... Empty
Admin State....................... Enable
Power State....................... Enable
Configured Card:
Model Identifier............... Dell Networking N3024F
Card Description............... Dell 24 Port 10G Fiber
Pluggable......................... No
Example #3
console(config-if-Gi1/0/23)#show slot
Admin Power Configured Card
Slot Status State State Model ID Pluggable
----- ------ ------- ------- -------------------------------- ---------
1/0 Full Enable Enable Dell Networking N3024F No
1/1 Empty Disable Disable Yes
2/0 Empty Enable Enable Dell Networking N3024F No
2/1 Empty Enable Enable Yes
3/0 Empty Enable Enable Dell Networking N3048 No
3/1 Empty Enable Enable Yes
console(config-if-Gi1/0/23)#show slot 1/0
Slot.............................. 1/0
Slot Status....................... Full
Admin State....................... Enable
Power State....................... Enable
Inserted Card:
Model Identifier............... Dell Networking N3024F
Card Description............... Dell 24 Port 10G Fiber
Configured Card:
Model Identifier............... Dell Networking N3024F
Card Description............... Dell 24 Port 10G Fiber
Pluggable......................... No