Dell N1100-ON - Page 239

Using the CLI 239
Radius From Global
Configuration
mode, use the
radius-server host
command.
console(Config-auth-
radius)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
Radius Dynamic
Authorization
From Global
Configuration, use
the aaa server radius
dynamic-author
command.
console(config-radius-da)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
SNMP Host
Configuration
From Global
Configuration
mode, use the
snmp-server
command.
console(config-snmp)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
SNMP v3 Host
Configuration
From Global
Configuration
mode, use the
snmp-server v3-host
command.
console(config-snmp)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
Table 2-5. Navigating CLI Command Modes (continued)
Command Mode Access Method Command Prompt Exit or Access
Previous Mode