Dell N1100-ON - Page 241

Using the CLI 241
Logging From Global
Configuration
mode, use the
logging command.
console(config-logging)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
MST From Global
Configuration
mode, use the
spanning-tree mst
configuration
command.
console(config-mst)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
VLAN Config From Global
Configuration
mode, use the vlan
command.
console(config-vlan)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
Router OSPF
Config
From Global
Configuration
mode, use the
router ospf
command.
console(config-router)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode
Table 2-5. Navigating CLI Command Modes (continued)
Command Mode Access Method Command Prompt Exit or Access
Previous Mode