Security Commands 925
Syntax
radius-server attribute 31 mac format { ietf | unformatted | legacy } [lower-
case | upper-case]
no radius-server attribute 31 mac format
• ietf—Format the MAC address as aa-aa-bb-bb-cc-cc. The default is upper
case.
• unformatted—Format the MAC address as aaaabbbbcccc. The default is
lower case.
• legacy—Format the MAC address as aa:aa:bb:bb:cc:cc. The default is
lower case.
• lower-case—Format hexadecimal characters using the character set [0-9a-
f].
• upper-case—Format hexadecimal characters using the character set [0-9A-
F].
Default Configuration
By default, the switch sends the Calling-Station-Id MAC address in lower
case legacy format and the User-Name (Attribute 1) is sent in legacy upper
case format.
Command Mode
Global Configuration
User Guidelines
Use this command to override the format of MAC addresses sent in the
Calling-Station-Id (attribute 31) and the User-Name (attribute 1) for
authentication requests for ports configured for MAC based 802.1x
authentication (MAB).
This command is only valid for 802.1X authentication.
This command does not override interface configuration for attribute 31 or
attribute 1.
Command History
Introduced in version 6.3.0.1 firmware.
To Next Page
Loading...
