FOR-A HVS-390HS - Page 183

183
VDCP1-4 PAUSE Pauses video on VDCP1-4. Always unlit
VDCP1-4 FWD Fast-forwards video VDCP1-4.
During execution: Lit,
Other cases: Unlit
VDCP1-4 STOP Stops recoding/playback on VDCP1-4. Always unlit
VDCP1-4 REC Records video on VDCP1-4.
During execution: Lit,
Other cases: Unlit
VDCP1-4 GOTO TOP Cues to 00:00:00:00 on VDCP1-4 Always unlit
When SEQ is selected for TYPE:
Setting Function Button Indication
MEMORY No.0-9 RECALL Recalls Sequence Memory 0 -9 Always lit orange
SEQUENCE PLAY Plays the sequence.
SEQUENCE PAUSE Pauses the sequence.
SEQUENCE STOP Stops the sequence.
SEQ FADER LINK M/E Enables/disables the fader link.
When STILL is selected for TYPE:
Setting Function Button Indication
STILL1-4 STORE Performs still captures. Always lit orange
INPUT STILL STORE
Captures and saves or clears a still
image for INPUT STILL 1 to 16.
Image stored: Lit
Image not stored: Unlit
CLIP 1-4 PLAY/PAUSE
Begins to play the recorded clip or
pauses the playback/recording.
Always lit orange
CLIP 1-4 STOP
Stops clip playback and cues to IN
point.
CLIP 1-4 REC Begins to record video
When OTHER is selected for TYPE:
Setting Function Button Indication
EDITOR ENABLE Sets editor control On/Off.
ON: Lit orange
OFF: Unlit
WIPE MODIFY BKGD RESET Resets the [WIPE BKGD] menu.
WIPE MODIFY KEY1 RESET Resets the [WIPE KEY1] menu.
WIPE MODIFY KEY2 RESET Resets the [WIPE KEY2] menu.
WIPE MODIFY ALL RESET
Resets the [WIPE MODIFY] menu for
all buses.
ASSIGN INHI ENABLE Enables the bus button inhibit function
ON: Lit orange
OFF: Unlit
ME CONTROL ENABLE Enables the M/E control.
CG WIPE ENABLE Enables CG WIPE.
ON: Lit orange
OFF: Unlit
FS ENABLE Enables/disables FS for each input.
ON: Lit orange
OFF: Unlit
EVENT NO0-9 RECALL Loads an event.
Event stored: Lit
Event not stored: Unlit
AUX1-8 TRANS ENABLE
Sets AUX Crossfade transitions to On
or Off.
ON: Lit orange
OFF: Unlit
VIRTUAL ENABLE Enables Virtual Link.
ON: Lit orange
OFF: Unlit
ROUTER ENABLE Enables router control.
AUX LINK ENABLE Enables AUX LINK.
MACRO BUS SELECT
Sets the KEY/AUX bus to Macro
mode.