76
(5) Turn F3 to change OVER WR (Overwrite) to ON to set overwrite protection.
DIRECT :PATTERN :OVER WR:DELETE : 1/1
RECALL : =020 : =ON : =OFF :
Before setting overwrite protection, set DIRECT to OFF
. Otherwise, the selected
pattern is set immediately when pressing the number button.
To Clear a Direct Pattern Registration Individually
(1) Press WIPE in the MEMORY block. The [DIRECT PATTERN] menu is displayed and the
keypad changes to DIRECT PATTERN mode.
(2) Turn F1 to change DIRECT to OFF, if it is ON.
(3) Turn F1 to select a Direct Pattern memory page from the menu.
DIRECT : PAGE :DIRECT :CLEAR : : 1/1
PATTERN : =0 : =OFF : >OFF : :
(4) Press the number button to be cleared. The [DIRECT RECALL] menu will then be
displayed.
(5) Turn F4 to change DELETE to ON. Press F4 to delete the registration.
DIRECT :PATTERN :OVER WR:DELETE : 1/1
RECALL : =020 : =OFF : =ON
Before clearing a direct pattern registration, set DIRECT to OFF
selected pattern is set immediately when pressing the number button.
To Clear All Direct Pattern Registrations
(1) Press WIPE in the MEMORY block. The [DIRECT PATTERN] menu is displayed and the
keypad changes to DIRECT PATTERN mode.
(2) Turn F3 to change CLEAR to ALL. Then press F3 to clear all direct patterns.
DIRECT : PAGE :DIRECT :CLEAR : : 1/1
PATTERN : =0 : =OFF : >ALL : :
To Next Page
Loading...
Need help?
General
