Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

1 Introduction
1.1 Concept and target groups of this manual
This upgrade and maintenance manual provides instructions for the following
procedures:
–
Upgrading the server configuration by adding optional hardware
components.
–
Upgrading the server configuration by replacing existing hardware
components with superior ones.
–
Replacing defective hardware components.
This manual focuses on on-site maintenance tasks. It is recommended to
prepare each service assignment following remote diagnostics procedures, as
described in the "ServerV
iew Suite Local Service Concept (LSC)" manual, see
"Documentation overview" on page 30.
CAUTION
The document at hand comprises procedures of a wide range of
complexity.
▶
Check the profile of qualification for technicians before assigning
tasks.
▶
Before you start, carefully read "Classification of procedures" on
page 25.
1.2 Notational conventions
The following notational conventions are used in this manual:
Text in bold Indicates references to names of interface
elements.
Text in monospace
Indicates commands and text to be entered by
the user
.
RX2540 M6 Upgrade and Maintenance Manual 21

Fujitsu PRIMERGY RX2540 M6 Specifications

General

Memory Slots	32 DIMM slots
Form Factor	2U rack server
Processor	Intel Xeon Scalable Processors (3rd generation)
Storage	Up to 24 x 2.5" or 12 x 3.5" drives
RAID Support	RAID 0, 1, 5, 6, 10
Network	4 x 1GbE ports (onboard), optional 10/25GbE
Power Supply	800 W, 1200 W, 1600 W
Expansion Slots	Up to 8x PCIe Gen4 slots
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
Management	iRMC S5