Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

4.8 Switching on the server
CAUTION
▶
Before switching on the server, make sure the top cover is closed.
In order to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and satisfy cooling requirements, the
server must not run while the top cover is removed.
▶
For more information, see "Important information" on page 35
.
▶
Press the On/Off button to start up the server
.
▶
Ensure that the power-on indicator is lit green.
4.9 Installing the front cover with lock
Figure 18: Installing the front cover with lock
▶
Attach the front cover in a slight angle to the front (1).
▶
Align the front cover to the front. The lock on the left side must be pushed in
(2).
Basic hardware procedures
RX2540 M6 Upgrade and Maintenance Manual 69

Fujitsu PRIMERGY RX2540 M6 Specifications

General

Memory Slots	32 DIMM slots
Form Factor	2U rack server
Processor	Intel Xeon Scalable Processors (3rd generation)
Storage	Up to 24 x 2.5" or 12 x 3.5" drives
RAID Support	RAID 0, 1, 5, 6, 10
Network	4 x 1GbE ports (onboard), optional 10/25GbE
Power Supply	800 W, 1200 W, 1600 W
Expansion Slots	Up to 8x PCIe Gen4 slots
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
Management	iRMC S5