▶
When using a RAID array, add the additional HDD to the RAID array
.
Configuring the RAID array, refer to the documentation of the RAID
controller, used in your configuration, see "Documentation overview"
on page 30.
Concluding steps
▶
If applicable, "Installing the front cover with lock" on page 69
.
7.4.3 Removing 3.5-inch HDD modules
Customer Replaceable
Unit (CRU)
Hardware: 5 minutes
Tools: tool-less
Preliminary steps
▶
If applicable, "Removing the front cover with lock" on page 52
.
▶
If the HDD module to be removed is combined into a RAID array, please
proceed as follows:
Hard disk drive (HDD) / solid state disk (SSD)
148 Upgrade and Maintenance Manual RX2540 M6
To Next Page
Loading...
