Concluding steps
▶
"Installing the fan cage" on page 76
.
▶
"Reassembling" on page 60.
▶
If applicable, connect external cables to the expansion card.
▶
"Connecting the power cord" on page 65.
▶
"Switching on the server" on page 69.
▶
If applicable, "Installing the front cover with lock" on page 69.
▶
"Enabling replaced components in the BIOS" on page 100.
▶
"Updating expansion card firmware" on page 95.
▶
"Resuming BitLocker functionality" on page 105.
9.7.4 Replacing a riser card
Field Replaceable Unit
(FRU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Locating the defective server" on page 49
.
▶
If applicable, "Removing the front cover with lock" on page 52.
▶
"Shutting down the server" on page 52.
▶
"Disconnecting the power cord" on page 53.
▶
"Getting access to the component" on page 56.
▶
"Removing the fan cage" on page 74.
▶
"Locating the defective component" on page 50.
Expansion cards and backup units
278 Upgrade and Maintenance Manual RX2540 M6
To Next Page
Loading...
