▶
If applicable, restore LAN teaming configurations, see "After replacing or
upgrading LAN controllers" on page 1
14.
9.7 Internal RAID riser module
9.7.1 Installing an internal RAID riser module
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Software: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Suspending BitLocker functionality" on page 87
.
▶
If applicable, "Removing the front cover with lock" on page 52.
▶
"Shutting down the server" on page 52.
▶
"Disconnecting the power cord" on page 53.
▶
"Getting access to the component" on page 56.
▶
"Removing the fan cage" on page 74.
Installing the expansion card into the internal RAID riser module
▶
Please read the documentation supplied with the expansion card.
▶
If applicable, remove the slot bracket from the expansion card, see
"Removing slot brackets" on page 239.
Expansion cards and backup units
RX2540 M6 Upgrade and Maintenance Manual 267
To Next Page
Loading...
