▶
"Resuming BitLocker functionality" on page 105
.
9.7.2 Removing an internal RAID riser module
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Suspending BitLocker functionality" on page
87
.
▶
If applicable, "Removing the front cover with lock" on page 52.
▶
"Shutting down the server" on page 52.
▶
"Disconnecting the power cord" on page 53.
▶
"Getting access to the component" on page 56.
▶
"Removing the fan cage" on page 74.
Removing the internal RAID riser module
▶
Disconnect all cables from the expansion card.
Expansion cards and backup units
RX2540 M6 Upgrade and Maintenance Manual 273
To Next Page
Loading...
