Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
16.5 iRMC microSD card
16.5.1 Note for embedded Lifecycle Management (eLCM)
The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC. It requires a valid eLCM
license key from user purchase order and activated through the iRMC
web interface.
For more information, see the “ServerView embedded Lifecycle
Management (eLCM)” user guide.
16.5.2
Installing the iRMC microSD card
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver (for cover 2)
Preliminary steps
▶
If applicable, "Removing the front cover with lock" on page 52
.
▶
"Shutting down the server" on page 52.
▶
"Disconnecting the power cord" on page 53.
▶
"Getting access to the component" on page 56.
▶
If applicable, remove the expansion card from slot 5 and slot 6, see
"Removing the expansion card" on page 263.
System board and components
RX2540 M6 Upgrade and Maintenance Manual 491

Fujitsu PRIMERGY RX2540 M6 Specifications

General

Memory Slots	32 DIMM slots
Form Factor	2U rack server
Processor	Intel Xeon Scalable Processors (3rd generation)
Storage	Up to 24 x 2.5" or 12 x 3.5" drives
RAID Support	RAID 0, 1, 5, 6, 10
Network	4 x 1GbE ports (onboard), optional 10/25GbE
Power Supply	800 W, 1200 W, 1600 W
Expansion Slots	Up to 8x PCIe Gen4 slots
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
Management	iRMC S5