determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
â–¶
Reorient or relocate the receiving antenna.
â–¶
Increase the separation between equipment and the receiver
.
â–¶
Connect the equipment into an outlet on a circuit dif
ferent from that to which
the receiver is connected.
â–¶
Consult the dealer or an experienced radio/TV technician for help.
Fujitsu is not responsible for any radio or television interference caused by
unauthorized modifications of this equipment or the substitution or attachment
of connecting cables and equipment other than those specified by Fujitsu. The
correction of interferences caused by such unauthorized modification,
substitution or attachment will be the responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to
any and all optional peripheral or host devices. Failure to do so may violate
FCC and ICES rules.
3.5 Environmental protection
Environmentally-friendly product design and development
This product has been designed in accordance with the Fujitsu standard for
"environmentally friendly product design and development". This means that
key factors such as durability, selection and labeling of materials, emissions,
packaging, ease of dismantling and recycling have been taken into account.
This saves resources and thus reduces the harm done to the environment.
More information can be found at:
https://ts.fujitsu.com/products/standard_servers/index.html
For Japan:
https://jp.fujitsu.com/platform/server/primergy/concept/
Energy-saving information
Devices that do not need to be constantly switched on should be switched off
until they are needed as well as during long breaks and after completion of
work.
Important information
46 Upgrade and Maintenance Manual RX2540 M6
To Next Page
Loading...
Need help?
General
