Fujitsu PRIMERGY RX2540 M6

▶
"Switching on the server" on page 69
.
▶
If applicable, "Installing the front cover with lock" on page 69.
16.5.3 Removing the iRMC microSD card
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver (for cover 2)
Preliminary steps
▶
If applicable, "Removing the front cover with lock" on page 52
.
▶
"Shutting down the server" on page 52.
▶
"Disconnecting the power cord" on page 53.
▶
"Getting access to the component" on page 56.
▶
If applicable, remove the expansion card from slot 5 and slot 6, see
"Removing the expansion card" on page 263.
Removing the iRMC microSD card
Figure 346: Removing the iRMC microSD card
System board and components
RX2540 M6 Upgrade and Maintenance Manual 493