Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

14 Front panel
14.1 Safety notes
CAUTION
▶
When inserting the COP (Common Operation Panel) into the
server, ensure not to pinch or strain any connected cables.
▶
Circuit boards and soldered parts of internal options are exposed
and can be damaged by static electricity. Always discharge static
build-up (e.g. by touching a grounded object) before handling
electrostatic-sensitive devices (ESDs).
▶
Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
▶
For more information, see "Important information" on page 35
.
14.2 Basic information
In case of a defective ambient temperature sensor, please replace Common
Operation panel (COP).
COP
The COP is mounted on the right side ear
. A flat cable is used for connection to
the system board.
Front VGA (option)
A front VGA connector can be installed at the front panel of some
configurations.
RX2540 M6 Upgrade and Maintenance Manual 447

Fujitsu PRIMERGY RX2540 M6 Specifications

General

Memory Slots	32 DIMM slots
Form Factor	2U rack server
Processor	Intel Xeon Scalable Processors (3rd generation)
Storage	Up to 24 x 2.5" or 12 x 3.5" drives
RAID Support	RAID 0, 1, 5, 6, 10
Network	4 x 1GbE ports (onboard), optional 10/25GbE
Power Supply	800 W, 1200 W, 1600 W
Expansion Slots	Up to 8x PCIe Gen4 slots
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
Management	iRMC S5