Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

10 Main memory
10.1 Safety notes
CAUTION
▶
Before removing several memory modules, make sure that all
memory modules can be reinstalled into their original slots.
Otherwise, data may be lost.
▶
Do not install unsupported third party memory modules. For more
information on supported memory modules, see "Basic
information" on page 330. Doing so may cause electric shock, a
fire, or failures.
▶
Memory modules remain hot after shutdown. W
ait for components
to cool down before installing or removing memory modules to
prevent burns.
▶
Do not install and remove memory modules repeatedly. Doing so
may cause failures.
▶
If the memory module has not been correctly installed, it may cause
a fire. Install the memory module with attention.
Pressing out the securing clips on the memory module connector
will eject the installed memory module. To prevent damage and
injuries eject memory modules carefully without applying excessive
force.
▶
For more information, see "Important information" on page 35.
RX2540 M6 Upgrade and Maintenance Manual 329

Fujitsu PRIMERGY RX2540 M6 Specifications

General

Memory Slots	32 DIMM slots
Form Factor	2U rack server
Processor	Intel Xeon Scalable Processors (3rd generation)
Storage	Up to 24 x 2.5" or 12 x 3.5" drives
RAID Support	RAID 0, 1, 5, 6, 10
Network	4 x 1GbE ports (onboard), optional 10/25GbE
Power Supply	800 W, 1200 W, 1600 W
Expansion Slots	Up to 8x PCIe Gen4 slots
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
Management	iRMC S5