Figure 157: Installing M.2 SSDs (B)
▶
Fasten each M.2 SSD with one screw (see circles).
Concluding steps
▶
"Reassembling" on page
60
.
▶
"Connecting the power cord" on page 65.
▶
"Switching on the server" on page 69.
▶
If applicable, "Installing the front cover with lock" on page 69.
▶
If applicable, update the system information of your server using the Chassis
ID Prom Tool, see "Using the Chassis ID Prom Tool" on page 110.
▶
"Updating expansion card firmware" on page 95.
▶
"Resuming BitLocker functionality" on page 105.
9.6.2 Removing an expansion card
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Expansion cards and backup units
262 Upgrade and Maintenance Manual RX2540 M6
To Next Page
Loading...
