▶
Insert the riser card.
▶
Fasten the riser card with four screws (see circles).
▶
Install the GPU card, see "Installing a GPU card in a riser module" on
page
291
.
Concluding steps
▶
Install the corresponding riser module, see "Installing a riser module" on
page 72.
▶
"Reassembling" on page 60.
▶
"Connecting the power cord" on page 65.
▶
"Switching on the server" on page 69.
▶
If applicable, "Installing the front cover with lock" on page 69.
9.10 Flash backup unit (FBU)
9.10.1 Positions of the FBUs
You can install up to two FBUs.
Expansion cards and backup units
316 Upgrade and Maintenance Manual RX2540 M6
To Next Page
Loading...
