Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

Concluding steps
▶
"Installing the cross bar" on page 81.
▶
"Installing the fan cage" on page
76.
▶
"Installing the air duct" on page 79.
▶
Install all riser modules, see "Installing a riser module" on page 72.
▶
"Reassembling" on page 60.
▶
If applicable, install the OCP module, see "Installing an OCP module" on
page 249.
▶
Install all PSUs, see "Installing a hot-plug PSU" on page 124.
▶
"Connecting the power cord" on page 65.
▶
"Switching on the server" on page 69.
▶
If applicable, "Installing the front cover with lock" on page 69.
16.4.5 Replacing the TPM
Field Replaceable Unit
(FRU)
Hardware: 35 minutes
System board and components
488 Upgrade and Maintenance Manual RX2540 M6

Fujitsu PRIMERGY RX2540 M6 Specifications

General

Memory Slots	32 DIMM slots
Form Factor	2U rack server
Processor	Intel Xeon Scalable Processors (3rd generation)
Storage	Up to 24 x 2.5" or 12 x 3.5" drives
RAID Support	RAID 0, 1, 5, 6, 10
Network	4 x 1GbE ports (onboard), optional 10/25GbE
Power Supply	800 W, 1200 W, 1600 W
Expansion Slots	Up to 8x PCIe Gen4 slots
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
Management	iRMC S5