Concluding steps
▶
If applicable, "Installing an expansion card" on page 255.
▶
If applicable,
"Installing the riser module 2" on page 73.
▶
"Reassembling" on page 60.
▶
"Connecting the power cord" on page 65.
▶
"Switching on the server" on page 69.
▶
If applicable, "Installing the front cover with lock" on page 69.
▶
"Resuming BitLocker functionality" on page 105.
▶
Enable the TPM in the system board BIOS, see "Enabling the TPM in the
system board BIOS" on page 483.
Enabling the TPM in the system board BIOS
▶
Switch on or restart your server.
▶
As soon as the startup screen appears, press the [F2] function key to enter
the BIOS setup menu.
▶
Select the Configuration menu.
▶
Select the Security Configuration submenu.
▶
Set the TPM Support setting to Enabled.
▶
Under Pending TPM operation, select the desired TPM operation mode.
▶
Save your changes and exit the BIOS.
For more information on how to access the BIOS and modify settings,
see the corresponding BIOS Setup Utility reference manual.
16.4.4 Removing the TPM
Field Replaceable Unit
(FRU)
Hardware: 30 minutes
System board and components
RX2540 M6 Upgrade and Maintenance Manual 483
To Next Page
Loading...
