Concluding steps
▶
"Reassembling" on page 60
.
▶
"Connecting the power cord" on page 65.
▶
"Switching on the server" on page 69.
▶
If applicable, "Installing the front cover with lock" on page 69.
▶
"Resuming BitLocker functionality" on page 105.
13.3.4 Replacing the ODD (2.5-inch chassis)
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: – Phillips PH2 / (+) No. 2 screw driver (for cover 2)
– T
orx Plus 6 screw driver (not valid for Japan)
– Phillips PH1 / (+) No. 1 screw driver (Japan)
Preliminary steps
▶
"Locating the defective server" on page 49
.
▶
"Removing backup and optical disk media" on page 90.
▶
"Suspending BitLocker functionality" on page 87.
▶
If applicable, "Removing the front cover with lock" on page 52.
▶
"Shutting down the server" on page 52.
▶
"Disconnecting the power cord" on page 53.
▶
"Getting access to the component" on page 56.
Removing the defective ODD
▶
Remove the ODD, see "Removing the ODD (2.5-inch chassis)" on
page 390.
Accessible drives
394 Upgrade and Maintenance Manual RX2540 M6
To Next Page
Loading...
