Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

Figure 166: Removing the internal RAID riser module
▶
Loosen the knurled screw (see circle).
▶
Push the internal RAID riser module to the rear to engage the holes and the
bolts (1).
▶
T
ake out the internal RAID riser module (2).
Removing the expansion card from the internal RAID riser module
▶
If necessary
, disconnect the cables from the expansion card.
Expansion cards and backup units
274 Upgrade and Maintenance Manual RX2540 M6

Fujitsu PRIMERGY RX2540 M6 Specifications

General

Memory Slots	32 DIMM slots
Form Factor	2U rack server
Processor	Intel Xeon Scalable Processors (3rd generation)
Storage	Up to 24 x 2.5" or 12 x 3.5" drives
RAID Support	RAID 0, 1, 5, 6, 10
Network	4 x 1GbE ports (onboard), optional 10/25GbE
Power Supply	800 W, 1200 W, 1600 W
Expansion Slots	Up to 8x PCIe Gen4 slots
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
Management	iRMC S5