Figure 194: Routing of the GPU power cable (example riser module 2)
▶
Install the riser module 2 in the chassis and route the GPU power cable as
shown.
Concluding steps
▶
"Reassembling" on page
60
.
▶
"Connecting the power cord" on page 65.
▶
"Switching on the server" on page 69.
▶
If applicable, "Installing the front cover with lock" on page 69.
▶
If applicable, update the system information of your server using the Chassis
ID Prom Tool, see "Using the Chassis ID Prom Tool" on page 110.
▶
"Updating expansion card firmware" on page 95.
▶
"Resuming BitLocker functionality" on page 105.
Expansion cards and backup units
306 Upgrade and Maintenance Manual RX2540 M6
To Next Page
Loading...
