Tools: hexagon screw driver 5 mm
Preliminary steps
▶
If applicable, "Removing the front cover with lock" on page 52
.
▶
"Shutting down the server" on page 52.
▶
"Disconnecting the power cord" on page 53.
▶
"Getting access to the component" on page 56.
Removing the rear VGA
Figure 331: Removing the rear VGA connector (A)
▶
Remove the two hexagon bolts (see circles).
Additional interfaces
RX2540 M6 Upgrade and Maintenance Manual 471
To Next Page
Loading...
