Fujitsu PRIMERGY RX2540 M6

▶
If applicable, move the M.2 SSD latch to a fitting position:
▶
Turn the M.2 SSD latch for 90 degrees (1).
▶
Remove the M.2 SSD latch (2).
▶
Install the M.2 SSD latch in the right position depending on the length of
the M.2 SSD (3).
▶
T
urn the M.2 SSD latch for 90 degrees (4).
System board and components
RX2540 M6 Upgrade and Maintenance Manual 499